IEE USB serial pole display instructions for 2.6.X kernel (early version).

To install in a 2.6.X kernel prior to 2.6.14.1 (fixme: changed between 2.6.8-24.18 and 2.6.14):
Change directory to the one where you extracted these files.
Type the following commands:

make
make install

If all went well, the driver should be installed in your kernel.  Be sure to reboot if any other devices using the ftdi_sio driver are running, or unload the driver before installing the pole display.

If there are warnings, they may *usually* be ignored.  If there are errors from the build, the kernel version you are running is likely incompatible with this driver.  Obtain the latest ftdi_sio drivers from IEE, Inc. (http://ieeinc.com/) or kernel.org.

